contact spring
英 [ˈkɒntækt sprɪŋ]
美 [ˈkɑːntækt sprɪŋ]
网络 接触弹片; 接触泉; 接触弹簧
双语例句
- I don't dare contact her even in spring festival, which made me worry about that she will misunderstand my idea.
就连过年过节，也不敢主动跟对方联系，总是怕人家误解我的真实想法。 - Conductors of supply cords shall not be consolidated by soldering where they are subjected to contact pressure, unless the contact pressure is provided by spring terminals.
电源线的导线在其承受接触压力之处，不应使用钎焊将其合股加固，接触压力由弹簧接线端子提供。 - Based on the cause analysis of the contact melting of limit switch in spring actuator, this paper puts forward two solutions that have proved to be effective in practice.
通过对弹簧操动机构行程开关接点易烧毁原因的分析，提出了两项改进措施，并在实际使用中取得了较好的效果。 - Side and bottom contact shoes are spring loaded to provide the necessary contact force.
边触式和下触式集电靴装有弹簧用来提供所需的接触压力。 - The utility model relates to a motorcycle handle switch device which comprises a switch casing, a driving shaft, a contact ring, a contact sheet, a spring, a base plate and a wire.
一种摩托车手柄开关装置，包括开关壳体、传动轴、接触环、接触片、弹簧、基板以及配线。 - The structure of fixed contact, return spring and conduction ways are the major factors influencing the power-on of electromagnetic switch.
指出了静触点结构、回位弹簧弹力以及通电方式是影响电磁开关粘连的主要因素； - Application of Electric Contact Heating to Flat Spring Wire Production
电接触加热在扁弹簧钢丝生产中的应用 - Calculating about the Mechanical Character of the Contact Spring System in the Electromagnetic Relay
电磁继电器触簧系统机械特性的计算 - The stiffness of a non-linear rubber-steel composite spring is analyzed by means of the finite element method. The non-linear properties of the rubber material and the contact between the spring and the spring container are considered.
通过运用非线性有限元方法，对橡胶复合型弹簧的刚度特性进行了计算分析，分析中考虑了橡胶材料的非线性特征以及橡胶弹簧与弹簧裙套接触时的非线性机理。 - Technics of gold plating on contact spring strip of microminiature relay
微型继电器接触簧片镀金工艺研究 - Problems of bad contact of limit switch in spring actuator
弹簧操动机构的行程开关接点问题 - The stress relaxation of contact spring appeared at high temperature is one of the main failure modes in high capacity circuit breaker.
大容量断路器的主要故障模式之一是触头弹簧在较高温度下出现的应力松弛。 - Fully according to contact characteristics of machine joint surfaces, using methods of 3D-contact unit and spring-damping unit to established finite element model in joint surface, then identification parameter of contact stiffness and damping in joint surface with optimization.
该文充分考虑机械结合面的接触特性，提出了利用三维接触单元和弹簧-阻尼单元相结合的方法建立结合面的有限元模型，再应用优化参数法对结合面的接触刚度和阻尼等参数进行识别。 - This device has a new contact structure, so that contact spring can be eliminated.
该装置具有一个新的触头结构，因此消除了触头的弹跳。 - Contact deformation between head of spring and hole of chucking affects the accuracy in stiffness measurement of spring. The contact model and error analysis model are established based on Hertzian contact theory.
本文研究了弹簧管头部与夹具孔间的接触变形对弹簧管的刚度测量精度的影响，基于Hertzian接触理论建立了接触模型及其误差分析模型。 - Based on the broken reasons of rolling contact bearing, accurate 3D-solid model of disc cam and rolling contact bearing in the spring operating mechanism was built via the software of UG and successfully imported to the finite element software of ANSYS.
本文通过分析易损件滚动轴承失效的原因，先在UG软件中建立了比较精确的CT□-110型弹簧操动机构中凸轮、滚动轴承的三维实体模型，并成功地导入有限元分析软件ANSYS中。 - Some features of the dynamic forces are analyzed in regard of the train speed, linear or nonlinear contact spring and the elasticity of ballast.
通过参数分析得到了列车速度、轮轨接触弹簧及道床弹性等对轮轨振动附加力的影响特点。 - The dynamic simulating analysis of disc cam and rolling contact bearing in the spring operating mechanism was performed in ANSYS/ LS-DYNA and got some key data of contact forces in the collision process.
在ANSYS/LS-DYNA环境中对盘形凸轮与滚动轴承的高速碰撞过程用有限元数值方法模拟、仿真接触过程，计算碰撞过程中接触力的变化情况及各点的接触力数值。 - The parameterized contact finite-element model of spring has been built, and non-linear stiffness in vertical direction has been analyzed in this paper. The result of analysis is consistent with experiment results very well.
建立了橡胶弹簧的参数化有限元接触模型，对弹簧轴向刚度的非线性特性进行了分析，分析结果与实验结果能很好地吻合。 - Analysis makes known, what it is along the progressive failure process of the slop that be able to more reasonably make known steady along slope actual situation, utilize contact friction spring element.
分析表明，边坡稳定性分析的渐进破坏法能更合理地反映边坡稳定的实际情况，利用接触摩擦弹簧元可以有效地模拟这一过程。 - The Research on Dynamic Contact Character of Spring System for Electromagnetic Relay
电磁继电器触簧系统动态接触特性的研究 - A series of tests have been done on contact without spring by means of powder metallurgical connection, which provide reliable evidence on its application.
对采用粉末冶金方式连接的自力型触头进行了一系列的试验，为它的应用提供了可靠的根据。 - This article analyses the influence of the contact spring fitted on different positions on closing and opening processes through comparison experiments and shows that double-bellow vacuum circuit breaker with the contact spring fitted on the fixed contact is a better method to solve many mechanical problems.
通过对比试验，分析了触头弹簧安装形式对分合闸过程的影响，提出了采用静端安装触头弹簧双波纹管真空断路器是解决许多机械问题的好方法。 - DT Contact Problem in Spring Handling Mechanism and Its Solution
弹簧操动机构中DT触点存在的问题及解决方案 - Experiment Analysis of Influence of Fitting Positions of Contact Spring on Closing and Opening in Vacuum Interrupter
真空灭弧室触头弹簧安装位置对分合闸过程影响的试验分析 - The RF shield structure is called double finger shield structure which consists of contact fingers and spring fingers.
SSRF采用了由接触指和弹簧指构成的双指型屏蔽机构。 - At present, the contact spring is used respectively to reduce buffer. This solution faced with the problem is the existing paradox of buffer spring strength and closing power.
目前的操动机构采用在合闸时利用触头弹簧实现缓冲，这种解决方法面临的问题是缓冲弹簧的强度和合闸功存在的矛盾。 - Compared to the result of common curvature method, it can conclude that the finite element method is reasonable and superior, and a new method in dealing with the contact problem of leaf spring is proposed.
与共同曲率法作对比分析，得出有限元分析的合理性和优越性，为解决板簧接触问题应力计算问题提出一种合理的方案。 - Thesis adopts the collision contact method and the spring-damping unit linearization method, and establishes a relationship of force between separate parts, blanking strip and punches.
论文采用碰撞接触方法与弹簧-阻尼单元线性化处理方法，建立了冲裁中分离部分与条料、凸模间的作用力关系。